Guides
Blind Cash Counts: What They Are and Why Your Store Needs Them
A blind cash count hides the expected total from the person counting the drawer until they record what they counted. This guide explains why it catches errors open counts miss, makes skimming harder and protects honest staff. It walks through a 7-step process with a sample count sheet, common objections, notes for phone and repair shops (deposits, trade-ins, refunds) and a checklist.
Picture your closing clerk at the end of a long Saturday. The register screen says the drawer should hold $1,284.50. They count, get $1,279.50, and count again. On the second pass, a $5 bill that was "probably stuck to another one" turns up. The drawer balances. Everyone goes home.
Maybe the bill really was there. Or maybe the drawer was $5 short and the second count just found the number it was looking for. You'll never know, because the counter knew the answer before they started.
That's the problem a blind cash count solves. It's one of the simplest cash controls a small store can add, it costs nothing, and it makes every other part of your daily close more reliable.
The short answer: A blind cash count is a drawer count where the person counting can't see the expected total until they've recorded what they counted. Because they aren't counting toward a target, the number they enter is honest, so real overages and shortages show up instead of being "found" or smoothed over. To run one, hide the expected cash from the counter, count by denomination, enter the total, then let a manager or the POS reveal the difference.
What a blind cash count is
In an open count, the person counting the drawer can see what the system expects before or during the count. In a blind count, they can't. They count the cash, record the total, and only then does anyone compare it with what the POS says should be there.
That's the whole idea. The cash, the counting and the math are the same. The only change is when the expected number shows up.
| Open count | Blind count | |
|---|---|---|
| Counter sees expected total | Before or during the count | Only after entering their count |
| What the counter is doing | Checking whether the drawer matches | Reporting what's actually there |
| Small errors | Often "fixed" with a recount toward the target | Recorded as they are |
| Skimming risk | Easier: counter knows how much extra is safe to take | Harder: counter doesn't know the expected total |
| Over or short record | Tends to look cleaner than reality | Shows the real pattern over time |
| Time to count | About the same | About the same |
You'll also hear it called a blind drawer count, a blind close or a blind till count. They all mean the same thing.
Blind counts work at any point you count cash: opening the drawer, a shift change, a mid-day pickup or the end-of-day close.
Why your store needs blind counts
People count toward the number they expect
This isn't about dishonesty. If you know the answer is $1,284.50 and you get $1,279.50, you'll assume you made a mistake and recount until you get closer. Most of the time you'll find something: a bill stuck to another, a roll of quarters you missed. Sometimes you'll find it whether it's there or not.
A blind count removes that pull. The counter has no target, so the first careful count is the one that gets recorded.
It makes skimming much harder
With an open count, someone who wants to take cash knows exactly how much is "extra." If a drawer runs $15 over because of a customer's mistake, they can pocket $15 and the drawer still balances.
In a blind count, they don't know whether the drawer is over, short or exact. Taking cash becomes a guess, and guesses show up as shortages.
It protects honest employees
When counts are blind and every result is recorded, a single short drawer is just a data point. It's the pattern over weeks that tells you something. That's fairer to your staff than a manager eyeballing the drawer and deciding someone looks guilty.
It gives you better data
Over and short amounts are useful only if they're real. A month of blind counts tells you which shifts, registers or tasks (cash refunds, repair deposits, paid-outs) cause most of your differences. A month of open counts that all "balance" tells you very little.
It costs nothing
You don't need new equipment. You need a rule about who sees the expected total and when, and ideally a POS that hides the number until the count is entered.
How to run a blind cash count
Here's the process for an end-of-day close. The same steps work at a shift change.
- Hide the expected total. Turn off any on-screen expected cash for staff, or set up your POS so only managers can see it. If you print a Z report, the manager pulls it, not the counter.
- Pull the drawer and move to a quiet spot. Count away from the sales floor and out of view of the front window.
- Count by denomination. Bills first, largest to smallest, then coins. Write the quantity and value of each on a count sheet or enter it in your POS.
- Record the total before anything else. The counter enters or signs their total. Once it's recorded, it doesn't change.
- Reveal and compare. The manager, or the POS, now shows the expected cash and the difference.
- Recount only if the difference is over your tolerance. If it is, a second person recounts. Record both counts, not just the one that balances.
- Note a reason if there is one. "Gave $10 change instead of $5 around 3 p.m." or "Unknown" are both fine. Blank isn't.
Example count sheet
This is a sample, not data from a real store.
| Denomination | Quantity | Value |
|---|---|---|
| $100 | 2 | $200.00 |
| $50 | 4 | $200.00 |
| $20 | 31 | $620.00 |
| $10 | 12 | $120.00 |
| $5 | 14 | $70.00 |
| $1 | 52 | $52.00 |
| Quarters | 40 | $10.00 |
| Dimes | 25 | $2.50 |
| Nickels | 40 | $2.00 |
| Pennies | 300 | $3.00 |
| Counted total | $1,279.50 | |
| Expected (revealed after count) | $1,284.50 | |
| Difference | $5.00 short |
The counter recorded $1,279.50 without knowing the target. The $5 shortage goes on the record, and if it keeps happening on the same shift, you'll see it.
For the rest of the close (removing the float, matching card batches and preparing the deposit), see our guide to closing out a register.
Common objections and mistakes
"My staff will feel like I don't trust them"
Explain it the way it is: blind counts protect them. If a drawer comes up short, the record shows a careful count made without any target, not a number someone was pressured to hit. Apply the rule to everyone, including managers and owners when they close.
"I'm the only one who closes"
It still helps. Counting before you look at the expected total keeps you from "finding" errors that aren't there, and your over and short history stays honest. If your POS can hide the number, let it.
Mistakes to avoid
- Showing the number "just this once." One exception becomes the habit. Keep the rule simple.
- Leaving the Z report on the counter. If the expected total is printed and lying next to the drawer, the count isn't blind.
- Recounting until it balances. Record the first count. If you recount, record that too.
- Ignoring small differences. A $2 short once means nothing. A $2 short every Tuesday night means something.
- Reviewing differences in public. Talk to employees about patterns privately, with the records in front of you.
Notes for phone and repair shops
Phone stores and repair shops run a lot of non-sale cash through the drawer. Blind counts are especially useful here because these transactions are where most unexplained differences hide:
- Repair deposits. Cash taken as a deposit must be entered against the repair ticket. A blind count will expose deposits that went into the drawer but never into the system.
- Cash trade-ins. Cash paid out for a used phone should be logged as a paid-out with the device's IMEI. If it isn't, the drawer runs short.
- Accessory refunds. Quick cash refunds on cases and chargers are easy to hand out without ringing a return. Blind counts make those show up. If you see repeated differences that match common deposit or refund amounts ($25, $50, $19.99), start there.
Blind count checklist
- Expected cash hidden from the person counting
- Z report or expected total kept by the manager only
- Drawer counted away from the sales floor
- Bills and coins counted by denomination
- Counted total recorded before the expected total is shown
- Difference revealed by a manager or the POS
- Second count only if over tolerance, with both counts recorded
- Reason noted for any difference, or "unknown"
- Repair deposits, trade-ins and refunds checked against the system
- Weekly review of differences by shift, register and employee
How SimplyPOS helps
SimplyPOS is point of sale software for independent US retailers, with a focus on phone stores and repair shops. For blind counts and cash control, it gives you:
- Blind counts built into till management, so staff enter what they counted before the expected total appears
- Till open and close for each register, each with its own float
- Staff permissions, so you decide who can see expected totals and over and short reports
- One login per person, so every count is tied to the employee who did it
- Returns, discounts and paid-outs recorded in the system, not handled outside it
- Reports exportable to CSV or Excel, to spot patterns over weeks
- Repair Center add-on (on the SimplyRetail plan) to log repair deposits against each ticket See the details on the cash and payments page.
FAQ
What is a blind cash count?
It's a count of the cash drawer where the person counting doesn't see the expected total until after they've recorded their count. It keeps the count honest and makes real overages and shortages visible.
Does a blind count take longer than a regular count?
No. The counting is the same. If anything it can be faster, because people stop recounting to chase a target number.
Who should see the expected total?
A manager, the owner, or the POS itself after the count is entered. The person counting shouldn't see it until their total is recorded.
What if the blind count is off by a few dollars?
Record it, add a reason if you know one, and move on if it's under your tolerance. Small differences happen. Watch for repeats on the same shift or register.
Can I do blind counts with a paper count sheet?
Yes. Have the manager keep the Z report or expected total until the counter signs their sheet. A POS that hides the number does the same thing with less room for slips.
This is general information about cash handling, not legal or accounting advice. Ask your accountant how to record over and short amounts in your books.
Make your next count blind
Turn on blind counts in SimplyPOS and see what your drawers really look like. Try every feature free for 14 days, no credit card needed.
Start free trial · See pricing
Related reading: How to Close Out a Register: The End-of-Day Guide · How Much Does a POS System Cost? Software, Payments and Hardware Explained